Henan Hongda Co., Ltd. produces poplar wood as the main material of the packaging material plate surface using birch , mahogany , poplar bleach and other materials dough. Products with smooth surface evenly, no hollow inside and outside the plate , no wormhole , no virtual edge , glued and strong features .
Plywood using poplar wood production has the following advantages :
★ poplar wood with a straight grain , reduced inflation , high impact toughness, good damping properties
★ no smell , easy to nail , nail holding power is small but not split
★ rugged strong , simple process , easy to install
★ appearance, reliable performance , recyclable
Usage:
Suitable for military, food, tea , medicine, precision instruments , industrial products and other shipping container processing
Poplar material disadvantages:
While Aspen has the disadvantage of loose fiber structure , but after hot glue from poplar plywood fully compensate for this shortcoming, but also magnified poplar own merits , higher strength, better flexibility .
Three categories of packaging materials packaging ( wooden crates , plastic crates and paper packaging ) advantages and disadvantages:
A : wooden crates wooden crates that material , which is made using wood panels made of nails . The advantages are: strong and sturdy , simple process , easy installation , beautiful appearance , reliable performance , recyclable , multi- products for industrial transport packaging . But its shortcomings are sealing and cushioning properties are relatively poor.
II: Plastic crates though sealing and cushioning to overcome the problem of poor wooden crates , with the quality of light, weather is good , beautiful and durable , recycling and so on. But it has a fatal flaw that pollute the environment , which is our living environment is a big disadvantage.
Three: paper box inner and outer layers are made using paper plates , so not only does not pollute the environment, but also can be recycled, greatly reducing the cost , roof and side panels made using flute , corrugated floor made of composite board or cardboard, paper products because of its rugged strong performance is relatively poor, can not afford high-intensity work environment , easily broken .
Packaging board use and maintenance:
Use : the need to use when cutting plate 80 tooth alloy saw above , the blade should be higher than the top of the outer packaging board one centimeter , a chainsaw is not less than 4000 rpm rev / min . Such as packaging board is cut or drilled at the site , you need to be cut in the marginal edge drilling special paint brush . When packing plate group fight , horizontal packaging board assembly directly or seams between the tape affixed straight line packaging board patchwork plus sponge cutter bar assembly . Nails , it is necessary under the mat square timber , packaging boards beware vacant form showing negative split when drilling in the packaging of iron . The use of special seals blocking seal bolt holes through walls .
When form removal , packaging board should prevent large fall.
Patch : Packaging board use , the more subtle scratches , breakage available flat before filling putty Tim refinish with special seals ; greater damage , holes can be driven into the wedge and then putty, refinish repair.
Maintenance: After packaging board packaging board requires full health , hygiene packaging board should look something every use to prevent the use of sharp , phenolic resin film to prevent damage to the surface of the packaging board , if prolonged storage should be maintained in the appearance of coated packaging boards agent .
Storage: In the process of transportation and storage , should prevent sun and rain caused severe deformation and board packaging film appearance of aging. At the construction site , packaging boards should be placed on a flat horizontal boring venues wooden bottom level of not less than three 10 × 10CM support, prevent storage temperature and high temperature locally.
上一页:当前为第一页
下一页:Poplar packaging board
- The director of the national eppo... [2011-09-22]
- Company in 2013 to celebrate the ... [2013-09-30]
- In May 2010, resistant to sail pa... [2014-02-14]
- A whole wardrobe production proce... [2014-03-10]
- Xinxiang man-made board industry ... [2012-09-06]
- Congratulations to the Henan HTC ... [2015-06-18]
- Spring 2013, hongda group mobiliz... [2013-02-21]
- Vice-governor, poverty alleviatio... [2013-10-16]
- Congratulations to hongda wood in... [2014-01-03]
- Henan provincial party committee ... [2009-10-28]